How to set alarm on Edifice EQS-A500

Before using this guide, we recommend:

• Download official EQS-A500 Manual →
• Watch official 5289 EQS-A500 Manual Online →

All settings are clearly explained and understandable.

To change the alarm time setting

1. In the Timekeeping Mode, press C four times to enter the Alarm Mode.

• The 5 Lower Dial Hand will move to AL.

2. Pull out the crown to enter the alarm setting mode.

• If you do not perform any operation with the crown for about two minutes after pulling it out, crown operations will become disabled and the watch hands will no longer move when you rotate the crown. If this happens, push the crown back in and then pull it out again.
• You can toggle between the hour and minute setting mode, and the hour only setting mode by pressing C.

3. Rotate the crown to set the alarm time.
The 1 Hour Hand will also move.

• See “Using the Crown” (page E-3) for information about high-speed hand movement.

4. Press C to switch to the hour setting mode.

• The 1 Hour Hand will move slightly left and right to indicate the 1 Hour Hand setting mode.
• Check the 24-hour time indicated by the 4 Upper Dial Hand to see if the current setting is a.m. or p.m.

5. Rotate the crown to adjust the hour setting only.

• See “Using the Crown” (page E-3) for information about high-speed hand movement.

6. After the setting is the way you want, push the crown back in to exit the alarm setting mode.

• The alarm always works based on the time kept in the Timekeeping Mode.
• The watch will return to the Timekeeping Mode automatically if you do not perform any operation in the Alarm Mode for about two or three minutes.

To turn the alarm on or off

In the Alarm Mode, press A to toggle the alarm between on and off. The 2 Second Hand will indicate the current ON/OFF setting.

Note

• The alarm will not sound if battery power is low.
• The alarm will not sound if the watch is in the Power Saving sleep state.

To stop the alarm

Press any button.

Recent News about Casio Edifice EQS-A500 Series 

All Edifice EQS-A500 News →