1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.
- To set a one-time alarm, display one of the screens indicated by an alarm number from 2 through 5. To set the snooze alarm, display the screen indicated by 1.
2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash, which indicates the setting screen.
- This operation automatically turns on the alarm.
3. Press C to move the flashing in the sequence shown below to select other settings.
4. While a setting is flashing, press D to increase it.
- To set an alarm that does not include a month (Daily alarm, Monthly alarm), set – for the month. Press D until the – mark appears (between 12 and 1) while month setting is flashing.
- To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set — for the day. Press D until the — mark appears (between the end of the month and 1) while the day setting is flashing.
- When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. or p.m. (P indicator).
5. Press A to exit the setting screen.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off or change it to a one time alarm.
- To stop the alarm tone after it starts to sound, press any button.
- Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.
To test the alarm
- In the Alarm Mode, hold down D to sound the alarm.
To turn Alarms 2 through 5 and the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select a one-time alarm (alarm number 2 through 5) or the Hourly Time Signal (:00).
2. Press A to toggle it on and off.
- The on/off status of Alarms 2 through 5 and the Hourly Time Signal is shown by indicators along the bottom of the displays.
- The alarm on indicators and Hourly time Signal on indicator are displayed in all modes.
- While an alarm is sounding, the applicable alarm on indicator flashes on the display.
To select the operation of Alarm1
1. In the Alarm Mode, use D to select Alarm1.
2. Press A to cycle through the available settings in the sequence shown below.
- The snooze on indicator and Alarm1 on indicator are displayed in all modes.
- The snooze on indicator flashes during the 5-minute intervals between alarms.
- The alarm indicator (Alarm1 on and/or snooze on) flashes while the alarm is sounding.
Being a fan of CASIO watches since 2009, I strive to share my passion and knowledge with others. Through publishing short notes and curating all listings on this site, I hope to inspire fellow enthusiasts to explore the world of high-quality CASIO watches. A proud owner of GST-B200, GG-1000, GA-110. Remember: Fake Watches are for Fake People.
Leave a Reply