Before using this guide, we recommend:

All settings are clearly explained and understandable.

1. Just as the second hand reaches 12 o’clock, pull out the crown to the second click.

  • This will stop the second hand.

2. Rotate the crown to set the main hour and minute hands.

  • Take care that you set the correct AM or PM time. Watch the day indicator when the hour hand passes 12 o’clock. If the day indicator changes, it means you just passed midnight.
  • Set the hands to a time that is a few minutes past* the actual current time.

* Since you will re-start timekeeping in step 8 of this procedure, you should allow a few minutes to perform the other steps before that.

  • When setting the minute hand, move it four or fi ve minutes past the desired setting, and then back it up.

Example: To set a time of 10:08 p.m.

How to set time on Edifice EFR-304 Casio 5468-1

3. Use B to move the alarm hands to the same setting as the main hands.

  • The alarm time does not distinguish between a.m. and p.m.
  • Holding down B moves the hands at high speed.

How to set time on Edifice EFR-304 Casio 5468-2

4. Hold down A for about two seconds.

  • This will cause the World City hand to make one revolution.

5. Use B to move the World City hand to the city that matches your current location (time zone).

  • Holding down B moves the hand at high speed.

Example: TOKYO

How to set time on Edifice EFR-304 Casio 5468-3

6. Hold down A for about two seconds.

  • This will cause the World Time Hour hand to make one revolution.

7. Use B to move the World Time hands to the same setting as the main hands.

  • Holding down B moves the hands at high speed.

How to set time on Edifice EFR-304 Casio 5468-4

  • Holding down A for about two seconds will cycle the currently selected hand in the sequence below.

8. When the hands are at the desired setting (10:08 p.m. in this example), push the crown back in.

  • This will start normal timekeeping.

How to set time on Edifice EFR-304 Casio 5468-5

Casio Shops we trust: