The Ultimate Guide to All G-SHOCKs — composed by Experts
Before using this guide, we recommend:
All settings are clearly explained and understandable.
- In any mode, pull out the crown to the second click.
– This will cause the Second Hand to move to the city code of the currently selected Home City.
– Leaving the crown pulled out for more than two minutes without performing any operation will automatically cause crown operations to become disabled. If this happens, press the crown back in, pull it out, and then start the operation over again. - Change the Home City setting, if you want.
To change the Home City setting, perform step 2 under “To configure Home City settings” (page E-24).
- Hold down C for about one second. This will enter the time and date setting mode.
– The watch will beep and the x Second Hand will move to 12 o’clock.
– In the following steps, each press of C cycles between settings as shown below.
- Rotate the crown to adjust the minute setting.
A high-speed movement feature (one full cycle maximum) is available when adjusting the hands. See “Crown Operations” (page E-3).
- Press C.
The Hour Hand will move slightly left and right to indicate the hour and day setting mode.
- Rotate the crown to change the current hour and day settings.
– Keep rotating the crown to move the z Hour Hand until the Day Indicator shows the day you want.
– The Day Indicator will change gradually between 10 p.m. and 2 a.m. During this period the number indicating the day will not be centred in the indicator window.
– x While changing the hour setting, you can determine whether the setting is a.m. or p.m. by watching the Day Indicator as the z Hour Hand passes 12 o’clock.
– A high-speed movement feature (one full cycle maximum) is available when adjusting the hands. See “Crown Operations”.
- Press C to enter the month setting mode.
The Second Hand will move to the currently selected month.
- Rotate the crown to adjust the month setting.
- Press C. This will enter the year setting mode.
The n Small Hour Hand indicates the number that represents the tens digit of the year and the b Small Minute Hand indicates the number that represents the ones digit.
- Rotate the crown to adjust the year setting.
- After the settings are the way you want, push the crown back in to return to the mode you started from in step 1.
– This causes timekeeping to resume with the x Second Hand starting from 12 o’clock.
– The day of the week indicated by the , Lower Dial Hand changes automatically in accordance with the date (year, month and day).
Save your watch with MTG-S1000 Protective Screen
Keep your watch collection safe and guard!
Being a fan of CASIO watches since 2009, I strive to share my passion and knowledge with others. Through publishing short notes and curating all listings on this site, I hope to inspire fellow enthusiasts to explore the world of high-quality CASIO watches. A proud owner of GST-B200, GG-1000, GA-110. Remember: Fake Watches are for Fake People.
Leave a Reply