How to set alarm on G-Shock GB-5600

In the Timekeeping Mode, press C three times to enter the Alarm Mode. See “Using Modes” (page E-14). An alarm setting screen (Alarm 1 through Alarm 4, Snooze, or hourly time signal) will appear.

Before using this guide, we recommend:

• Download official GB-5600 Manual →
• Watch official 3409 GB-5600 Manual Online →

All settings are clearly explained and understandable.

Note

• If you do not perform any operation for about two or three minutes while in the Alarm Mode, the watch will automatically return to the Timekeeping Mode.

1. In the Alarm Mode, use D to select the alarm whose setting you want to change.

2. Use A to toggle the displayed setting between on and off.

 

The alarm indicator is displayed while any alarm (Alarm 1 through Alarm 4) is turned on, while the Hourly Time Signal indicator is displayed while the hourly time signal is turned on. While snooze is turned on, the Alarm Indicator and Snooze Indicator are both displayed.

3. To change an alarm time setting, hold down A for about two seconds until the hour digits of the current alarm time start to flash.

[SET Hold] will appear on the display. After that, [SET Hold] will disappear and the hour digits will flash.

4. Each press of C causes the fl ashing to move between the hour and the minutes digits. The flashing digits are the ones that are selected.
5. Use B and D to change the fl ashing setting, and set the hour and minutes you want.

• Holding down either button scrolls the setting at high speed.
• If you are using 12-hour timekeeping, the PM indicator will appear for times between noon and 11:59 p.m.

6. After all the settings are the way you want, press A to exit the setting screen.
7. To return to the Timekeeping Mode, press C four times.

Recent News about Casio G-Shock GB-5600 Series 

All G-Shock GB-5600 News →