The Ultimate Guide to All EDIFICEs โ composed by Experts
Before using this guide, we recommend:
All settings are clearly explained and understandable.
The Alarm Mode lets you configure five daily alarms. You also can use it to turn the Hourly Time Signal on or off.
- The watch beeps for about 10 seconds when an alarm time is reached.
- Turning on the Hourly Time Signal causes the watch to beep on the hour every hour.
- All of the operations in this section are performed in the Alarm Mode, which you enter by pressing B
To set an alarm time
1. In the Alarm Mode, use C to scroll through the alarm screens until the one whose time you want to set is displayed.
- The alarm screens are AL1, AL2, AL3, AL4, and AL5.
2. Hold down A until the hour digits of the current alarm time start to flash. This is the setting mode.
- Entering the setting mode automatically turns on the displayed alarm.
3. Press C to scroll the hour value, until it displays the value you want.
- When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no indicator) or p.m. (P indicator).
- The same 12-hour/24-hour format you select for the Timekeeping Mode time is also applied in the Alarm Mode.
4. After the hour setting is the way you want, press B to move the flashing to the minutes.
- Press C to scroll the minute value.
5. When the minute setting is the way you want, press B. This will cause โONโ to flash on the display.
- Press C to toggle the alarm setting between ON and OFF.
6. After the setting is the way you want, press A to exit the setting mode.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in.
- Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode time.
- To stop the alarm tone after it starts to sound, press any button.
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use C to select the Hourly Time Signal.
2. Hold down A for about three seconds until โONโ flashes on the display. This is the setting mode.
- Entering the setting mode automatically turns on the Hourly Time Signal.
3. Press C to toggle the Hourly Time Signal between on and off.
4. Press A to exit the setting screen.
To turn off all alarms and the Hourly Time Signal
In the Alarm Mode, hold down C for about three seconds.
- โALL OFFโ will appear on the display indicating all alarms and the Hourly Time Signal are turned off.
Recent News about Casio Edifice EFA-134 Seriesย
Being a fan of CASIO watches since 2009, I strive to share my passion and knowledge with others. Through publishing short notes and curating all listings on this site, I hope to inspire fellow enthusiasts to explore the world of high-quality CASIO watches. A proud owner of GST-B200, GG-1000, GA-110. Remember: Fake Watches are for Fake People.
Leave a Reply