How to set alarm on Casio DB-36

1. In the Alarm Mode, use E and D to scroll through the alarm screens until the one whose time you want to set is displayed.

• Each of the five alarm screens has an alarm number. The hourly time signal screen does not have an alarm number.

2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash, which indicates the setting screen.

• This operation automatically turns on the alarm.

3. Use C and B to move the flashing in the sequence shown below to select other settings.

4. While a setting is flashing, use E (+) and D (–) to change it.

• To set an alarm that does not include a month (Daily alarm, Monthly alarm), set – for the month. Use E and D until the – mark appears (between 12 and 1) while month setting is flashing.
• To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set — for the day. Use E and D until the — mark appears (between the end of the month and 1) while the day setting is flashing.
• When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (A indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm repeats up to seven times every five minutes until you turn the alarm off or change it to a one-time alarm.

• Pressing any button stops the alarm tone operation.
• Any time you display the setting screen while the Alarm1 screen is on the display, Alarm1 automatically becomes a one-time alarm.
• Displaying the Timekeeping Mode setting screen during a 5-minute interval between snooze alarms stops the current snooze alarm operation (but snooze alarm remains as the alarm type setting).

To test the alarm

In the Alarm Mode, hold down C to sound the alarm.

To turn Alarms 2 through 5 and the hourly time signal on and off

1. In the Alarm Mode, use E and D to select a one-time alarm (alarm number 2 through 5) or the Hourly Time Signal.
2. Press C to toggle it on and off.

• The on/off status of Alarms 2 through 5 is shown by indicators along the bottom of the displays ( = on). The SIG indicator shows the on (displayed)/off (not
  displayed) status of the hourly time signal.
• The alarm on indicators and hourly time signal indicator are displayed in all modes.
• While an alarm is sounding, the applicable alarm on indicator flashes on the display.

To select the operation of Alarm1

1. In the Alarm Mode, use E and D to select Alarm1.
2. Press C to cycle through the available settings in the sequence shown below.

• The SNZ indicator and Alarm1 on indicator are displayed in all modes.
• The SNZ indicator flashes during the 5-minute intervals between alarms.
• The alarm indicator (Alarm1 on and/or SNZ) flashes while the alarm is sounding.