Before using this guide, we recommend:
All settings are clearly explained and understandable.
1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.
- To set a one-time alarm, display an alarm screen AL1or AL2. To set the snooze alarm, display the SNZ screen.
- The snooze alarm repeats every fi ve minutes.
2. After you select an alarm, hold down A until the hour setting of the alarm time starts to fl ash, which indicates the setting screen.
- This operation turns on the alarm automatically.
3. Press C to move the fl ashing in the sequence shown below to select other settings.
4. While a setting is flashing, use D and B to change it as described below.
5. Press A to exit the setting screen.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every fi ve minutes, until you turn the alarm off.
- Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode time.
- To stop the alarm tone after it starts to sound, press any button.
- Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn an alarm on and off
1. In the Alarm Mode, use D to select an alarm.
2. Press A to toggle it on and off.
- Turning on a alarm (AL1 or AL2) displays the alarm on indicator (ALM) on its Alarm Mode screen.
- Turning on the snooze alarm (SNZ) displays the alarm on indicator and snooze alarm indicator (SNZ) on the Alarm Mode snooze alarm screen.
- In all modes, the alarm on indicator is shown for any alarm that is currently turned on.
- The alarm on indicator fl ashes while the alarm is sounding.
- The snooze alarm indicator fl ashes while the snooze alarm is sounding and during the 5-minute intervals between alarms.
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time Signal (SIG).
2. Press A to toggle it on and off.
- The Hourly Time Signal on indicator (SIG) is shown on the display in all modes while this function is turned on.
Recent News about Casio Baby-G BGD-140 Series
Being a fan of CASIO watches since 2009, I strive to share my passion and knowledge with others. Through publishing short notes and curating all listings on this site, I hope to inspire fellow enthusiasts to explore the world of high-quality CASIO watches. A proud owner of GST-B200, GG-1000, GA-110. Remember: Fake Watches are for Fake People.
Leave a Reply